外地標識牌設計制作好，如何處理包裝問題.

    作為外地的標識牌制作問題，制作完成后如何處理好打包的問題呢。在這樣的制作時間里，我們力求把最后的質量關。力求把創意設計的份量是把好最后的質量關，我們力求把標識牌剪邊好。在我們最后的標識牌制作過程中，需要把酒店標牌電鍍結束后，還要將半成品上的余量切掉。把酒店標牌半成品放在剪扳機的合適位置，外地標識牌設計在上面蓋一張紙板后再剪切，以免把酒店標牌表面的電鍍劃傷。這就是質量關的問題，電鍍的表面需要嚴格注意質量關，把這些品牌創意成功。我們的制作就是如此開始。

    在我們最后的制作時候，選擇裝飾板，在制作時，酒店標牌后面的裝飾板，是放置、安裝酒店標牌不可缺少的組成部分。人和時代標識牌力求把這些創意開始過來，它能使酒店標牌更加完美。我們成功的秘訣就是如此，注意保好樣品。

    在制作時如何處理好粘板，在選好的裝飾板上，量出并標記好酒店標牌要粘貼的位置。
我們也要注意保管的問題，最后的包裝也是非常重要的。把已完成的作品，裝入包裝袋，妥然保管好。并打好箱，訂好木架子。

Good signage design field, how to deal with packaging issues.

     As a field identification card production problems, produced after the issue of how to handle it well packaged. In this production time, we strive to put the final quality. Strive to creative design of the final amount is to good quality, we strive to identify the cutting edge of good cards. In our final identification card production process, the need to sign the hotel after plating, semi-finished products but also on the margin will be cut off. The hotel sign on the semi-cut trigger the appropriate position in the cardboard and then covered with a cut, so as not to scratch the plating surface of the hotel sign. This is the quality issue, plating the surface of the need for strict attention to quality, creative success of these brands. Our production is the case began.

     In our final production time, choose decorative plates, in the production, the hotel sign board behind the decoration is placed, the hotel installed an integral part of the plate. Signage sought and the times began to come of these ideas, it can be more perfect hotel signs. The secret to our success is the case, pay attention to ensure a good sample.

     How to deal with in the production of sticky board, decorative board in selecting, measure and mark a good hotel signs must be placed.
 We also pay attention to the custody of the problem, the final packaging is also very important. The completed works, into the bag, then take good care of properly. And lay the box, set a good wood shelf.